Truck Vibrator Offers More Complete Emptying Of Dump Trucks
Products Used Cougar® DC Truck Vibrator
Product Types Used Vibration Solutions , Truck Vibrators
Industry Rail and Truck Shipping
Customer Humphries Haulage, United Kingdom

Problem

The plant’s weigh feeders suffered carryback as a result of an inability to effectively clean the sidewall belts.

Brian Humphries, owner of a general hauling company, explained, “The green waste compost is a very sticky material, and it has a tendency to stay in the dump body, even when the lift is fully extended.”  Like most drivers, Humphries sometimes used sudden stop/starts to try and dislodge the material, with limited success. “We were finding that there would be 1,000 kg or more of compost clinging to the dump body,” he continued. “Sudden stops would help loosen the load some, but with the trailer body so high in the air, there’s always the risk of tipping over the truck or shearing the body mounting brackets. We ended up shoveling most of it out by hand,” he said.

Solution

The Martin® QC1TM Cleaner HD was installed on a modified mainframe to provide effective cleaning without interference from the sidewalls of the belt.

Brian Humphries contacted Martin Engineering. He explained to UK Sales Manager Dave Harasym that they were running Scania R480 three-axle trucks, with Schmitz three-axle dump trailers. The setup gives Humphries Haulage 70 cubic yards of capacity, with a gross vehicle weight of around 44,000 kg. “Incomplete emptying is a common problem with dump trucks of all sizes,” Harasym observed. “Even fairly dry materials can be affected by weather and other conditions, making them extremely difficult to evacuate completely. A short vibration cycle can be a very effective way to break the surface tension and allow the load to slide out,” he said. Harasym recommended the Cougar® DC 3200, an electric design that delivers 4,000 vibration cycles per minute (VPM) with 3,200 pounds of force, while drawing just 62 amps from the 24V version. “We had to experiment a little bit to find the optimum location for mounting the vibrator,” Humphries continued. “Once we settled on the best configuration, we found that we were able to cut about 30 minutes per load from our dumping time.”

Results

Following installation of the Martin® QC1TM Cleaner HD, the corrugated sidewall belts on the weigh feeders were much cleaner.

Tipping time has been cut in half by using a high-performance 24V truck vibrator to more efficiently empty dump beds. Humphries Haulage reports faster turnarounds and an ability to make more runs per day, while improving safety by avoiding the need for manual cleanout. Company officials have also cited reduced stress on truck brakes and body mounts among the benefits, as drivers no longer need sudden stop/starts to break loose stubborn loads.

Resources

PDF - Printable Version of Case Study Download
Brochure - Truck Vibration Solutions Download
Brochure - Martin Engineering Corporate Profile Download

View Additional Resources

We've solved your problem somewhere before!

While your problem seems unique and frustrating, with 70+ years of solving similar problems around the world, and with the most experienced and educated people on our teams, we can assure you that we’ve “Been There, Done That.” At least close enough to know what needs to be done next and adjust for your situation.

Put Us To The Test For Free! Let Us Give You a Solution.