CleanScrape® Secondary Cleaner

The CleanScrape® Secondary Cleaner is an all stainless steel assembly featuring independent 6-inch wide blades with carbide tips. Each tip is supported on spring-loaded arms at both ends. The load springs allow independent blade rotation back and forward as well as up and down. This range of motion provides equal load pressure across each blade, absorbs obstructions, conforms to ever-changing belt undulations, and is able to arc safely in the event of reversing belt direction or belt rollback.

Click the image above for an interactive 3D product visualization.

Expand to fullscreen for an immersive experience.
Click here to explore all Martin products in 3D.

Optimum cleaning results
"Free flow" design allows for material to pass through arms
Crowned mainframe design compensates for belt wear in the center
Low blade-to-belt pressure
Simple installation inside or outside of chute
Removed material returns to main flow
Requires less tensioning over lifespan
Handles reversing belts and belt rollback without damaging belt
Easy cartridge removal
Easy adjustment of cleaning pressure

Product Specifications

Belt Width	500 - 2600 mm
Belt Speed	5 m/s for vulcanized splices 3 m/s for mechanical splices
Temperature	Between -40 degrees C and 315 degrees C
Corrosive Conditions	Yes
Underground Applications	Yes (requires check with individual local regulations)
Compatible with Reversing Belts or Roll Back	Yes, without cleaning
Accommodates Mechanical Splices	Yes

Require Assistance?

Resources

CleanScrape® Secondary Cleaner Flyer	Download
Tech Data Sheet - CleanScrape® Secondary Cleaner	Download
Operator Manual - CleanScrape® Secondary Cleaner (Part 1)	Download
Operator Manual - CleanScrape® Secondary Cleaner (Part 2)	Download